The filling method of a direct-injection lighter involves several basic steps, including letting off the excess gas inside, shaking the filling can to even out the gas, aligning the nozzle of the filling can with the filling hole of the lighter, pressing the filling can firmly until the gas is full, letting the lighter sit for a few minutes to allow the temperature to rise, and then adjusting the flame size to ensure normal use.
First, make sure there is no excess gas inside the lighter. You can release the excess gas by pressing the bottom with a small tool or ball. Next, shake the inflatable can a few times to ensure even distribution of gas. Then, align the nozzle of the filling tank with the filling hole of the lighter, and press the filling tank firmly until the lighter is filled with gas. After inflating, it is recommended to let the lighter sit for a few minutes, because the lighter may not ignite due to low temperature when it is first inflated. Wait a few minutes for the lighter temperature to rise, and then you can use it normally. Finally, adjust the flame size as needed to ensure the lighter is working properly.
It should be noted that different types of lighters may have different charging methods, so you should confirm the type of lighter before operating and follow the specific charging guidelines or instructions for use. If you are not sure how to inflate correctly or encounter difficulties, it is recommended to consult a professional or refer to the relevant usage guide to ensure the safety and effectiveness of the operation.
